ER 37
Dacor
LED Lighting Driver Error
Display shows ER 37, internal lights may not dim or may flicker.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed LED driver module, Shorted LED light module, Loose lighting harness, Control board lighting circuit fault
How to Fix / Troubleshooting
Safety: Unplug the refrigerator before working on lighting.
This code indicates a problem with the LED lighting system.
- Identify faulty module: Note which lights are out or flickering (ceiling, side walls, freezer).
- Inspect connections: Remove the affected light cover and check the connector.
- Replace LED module: If a single module is out, replace that module. If multiple zones are affected, the LED driver or main PCB may be faulty.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
LED Light Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements