Refrigerator displays ER HS, may have temperature control issues or erratic cooling.

Safety: Unplug the refrigerator before working on sensors.

This code indicates a problem with the humidity sensor, often located in the fresh food compartment or in the pantry/deli drawer assembly on some Dacor models.

• Locate the humidity sensor: Refer to your model's layout; it is typically a small plastic sensor module with a wiring harness in the fresh food section.
• Check connections: Remove the cover and verify the sensor connector is fully seated. Look for corrosion or moisture on the plug.
• Inspect wiring: Follow the harness as far as accessible and check for pinched or broken wires.
• Reset power: After reseating the connector, restore power and monitor if ER HS returns.
• Replace sensor if needed: If the error persists, replace the humidity sensor module with a Dacor-compatible part.