Refrigerator door does not close properly or pops open; warm air enters and causes frost or condensation.

Safety: Use care when adjusting doors; they are heavy and can pinch fingers.

Steps to improve door sealing:

• Level the cabinet: Adjust leveling legs so the refrigerator is slightly tilted back, helping doors close by gravity.
• Inspect gasket: Look for tears, gaps, or hardened sections. Clean the gasket with warm soapy water and dry. Replace if damaged.
• Check for obstructions: Ensure shelves and food items are not preventing the door from closing fully.
• Adjust hinges: On many Danby models, hinge screws can be loosened to realign the door. Lift or shift the door slightly, then retighten screws.
• Test seal: Close the door on a piece of paper; you should feel resistance when pulling it out. Repeat around the perimeter to check for weak spots.