Electrolux Condenser Fan Motor Fault

Refrigerator displays F5 fault code; condenser fan may not run and compressor may overheat.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed condenser fan motor, Obstructed fan blades, Loose fan connector, Main control board fan driver failure

Safety first: Unplug the refrigerator before accessing the rear compartment.

Inspect fan: Remove the rear lower panel and visually inspect the condenser fan near the compressor. Clear any debris.
Spin by hand: If the fan is stiff or seized, replace the condenser fan motor assembly.
Check wiring: Ensure the fan connector is secure and wires are intact.
Test operation: After reassembly, restore power and verify that the fan runs when the compressor is on.

Medium 3/5

Condenser Fan Motor

Check Price on Amazon

We may earn a commission from links on this page.