Electrolux
Ice Production Failure
Ice maker not making ice; ice bin empty.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Water inlet valve failure on ice circuit, Ice maker module failure, Frozen fill tube, Low water pressure
How to Fix / Troubleshooting
Safety first: Turn off the ice maker and unplug the refrigerator before handling the ice maker.
- Verify water supply: Confirm the household shutoff valve is open and water pressure is adequate (typically 20–120 psi).
- Check fill tube: Inspect the ice maker fill tube for ice blockage and thaw with warm air if needed.
- Run ice maker test: Use the built-in test button or diagnostic mode to initiate a cycle. If it does not fill, test the ice maker water valve coil for continuity and replace the valve if open.
- Replace ice maker: If the valve is good but the ice maker does not cycle, replace the complete ice maker assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Dual Water Inlet Valve
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements