Refrigerator door does not close properly or pops open; warm air enters and causes condensation and frost.

Safety first: Ensure the refrigerator is stable before adjusting hinges.

Steps:

• Level the unit: Adjust the front leveling feet so the refrigerator leans slightly back. This helps doors close by gravity.
• Inspect gasket: Check the door gasket all around for tears, gaps, or hardened sections. Warm the gasket gently with a hair dryer and reshape it to improve sealing.
• Reduce door load: Remove heavy items from door shelves that may twist the door.
• Adjust hinges: On adjustable hinge models, loosen hinge screws slightly and realign the door so it sits square with the cabinet, then retighten.
• Replace gasket if needed: If the gasket is damaged, install a new Etna refrigerator door gasket specific to your model.