Fagor
Ice Maker Production Failure
Ice maker not producing ice, but water dispenser (if present) works normally.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty ice maker module motor, Frozen fill tube to ice maker, Defective ice maker thermostat or sensor, Ice maker switch in OFF position
How to Fix / Troubleshooting
Safety first: Unplug the refrigerator and close the water supply valve before servicing the ice maker.
Steps:
- 1. Check ice maker switch: Ensure the ice maker arm or switch is in the ON position.
- 2. Inspect ice bin and ejector: Remove the bin and check for jammed ice cubes blocking the ejector arms. Clear any obstructions.
- 3. Check fill tube: Inspect the water fill tube for ice blockage. Thaw gently with a hair dryer on low.
- 4. Test ice maker module: If accessible, test the ice maker motor and thermostat according to the service manual. If the module does not cycle, replace the ice maker assembly.
- 5. Restore power and water: After replacement, allow several hours for ice production to resume.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Ice Maker Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements