Fagor
Compressor Not Starting
Refrigerator not cooling in both compartments, interior light works but compressor is not running.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed compressor start relay/PTC, Defective compressor run capacitor, Open thermal overload on compressor, Faulty main control board not sending power to compressor
How to Fix / Troubleshooting
Safety first: Unplug the refrigerator before accessing the compressor area. Live testing around the compressor should only be done by qualified persons.
Steps:
- 1. Listen for sounds: Plug in briefly and listen for a click or hum from the compressor. Repeated clicking without running suggests start relay issues. Unplug again before touching anything.
- 2. Access compressor: Remove the rear lower panel to expose the compressor and start components.
- 3. Inspect start relay and capacitor: Remove the relay/PTC from the compressor terminals. Check for burn marks or rattling. Inspect the capacitor for bulging or leaks.
- 4. Replace suspect parts: If the relay or capacitor appears damaged, replace them with Fagor-approved equivalents.
- 5. Test operation: Reassemble, restore power, and monitor. If the compressor still does not start, the compressor itself or the main control board may be faulty, requiring professional diagnosis.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Compressor Start Relay / PTC Device
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements