H2
Frigidaire Professional
Ice Compartment High Temperature
Display shows H2; ice maker or ice compartment temperature is too high, ice production is poor or stopped.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Ice maker fan failure (if equipped), Ice compartment thermistor fault, Door not sealing around ice compartment, Frost buildup restricting airflow
How to Fix / Troubleshooting
Safety First: Unplug the refrigerator before removing ice maker covers or panels.
- 1. Inspect ice compartment: Remove the ice bin and look for frost buildup around the ice maker and chute. Clear any ice obstructions.
- 2. Check ice maker fan (if present): Some Frigidaire Professional models use a dedicated ice fan. Listen for fan operation when the freezer is running. Replace the fan motor if it does not run.
- 3. Check door chute flap: Ensure the dispenser chute flap closes fully to prevent warm air infiltration. Replace the flap or spring if it does not seal.
- 4. Inspect thermistor: If accessible, check the ice compartment thermistor for secure connection. Replace if damaged.
- 5. Monitor ice production: After corrections, allow 24 hours for ice production to normalize.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Ice Maker Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements