EF
Frigidaire
Evaporator or Ice Maker Fan Error
Display shows EF; ice maker or evaporator fan error depending on model; may have no ice production or poor cooling.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed ice maker fan motor, Ice buildup around fan, Faulty fan wiring, Defective main control board fan driver
How to Fix / Troubleshooting
Safety first: Unplug the refrigerator before accessing the ice maker or evaporator fan area.
Steps to address EF:
- 1. Determine which fan: Consult the tech sheet to see if EF refers to the freezer evaporator fan or a dedicated ice maker fan.
- 2. Access the fan: Remove the ice maker housing or freezer rear panel to expose the fan assembly.
- 3. Check for ice obstruction: Look for ice buildup around the fan blades. If present, defrost the area with a hair dryer on low, protecting plastic parts.
- 4. Test fan motor: Spin the fan by hand; if stiff or noisy, replace the fan motor. Check for proper voltage at the fan connector when the unit is running.
- 5. Inspect wiring: Ensure the harness is intact and firmly connected at both the fan and control board.
If the fan and wiring are good but EF persists, the main control board may be defective.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Ice Maker Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements