Frigidaire Temperature Control or Sensor Failure

Refrigerator runs constantly and is too cold or forms frost on food; compressor rarely shuts off.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Faulty thermistor reading too warm, Stuck relay on main control board, Air damper stuck open, Door gasket leaks causing constant run

How to Fix / Troubleshooting

Safety first: Unplug the unit before accessing sensors, dampers, or control boards.

Steps to address constant running:

  • 1. Verify door seals: Inspect gaskets for gaps or tears. Close a sheet of paper in the door; it should have resistance when pulled. Replace door gasket if loose.
  • 2. Check temperature settings: Set to factory recommended temperatures and avoid the coldest settings.
  • 3. Test thermistors: Measure resistance of fresh food and freezer thermistors and compare to the tech sheet. Replace any that are out of range.
  • 4. Inspect air damper: Ensure the damper is not stuck open, flooding the fresh food section with cold air.
  • 5. Evaluate control board: If sensors and damper are good but the compressor never cycles off, the main control board may have a stuck relay and need replacement.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Refrigerator Thermistor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements