HRS
GE Appliances
Control Board Reset / EEPROM Error
Display shows HRS and refrigerator may not cool properly; controls may be locked in a default state.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Corrupted control board memory, Power surge, Faulty main control board, Loose control board connections
How to Fix / Troubleshooting
Safety first: Unplug the refrigerator before accessing the control board.
- Power cycle: Disconnect power for at least 10 minutes to allow the control to fully discharge. Plug back in and see if HRS clears.
- Inspect control board: Remove the rear access cover to expose the main control board. Look for burnt components, bulging capacitors, or loose connectors. Reseat all plugs firmly.
- Check for moisture: Ensure there is no water intrusion around the control area.
- If HRS persists: The main control board's memory (EEPROM) is likely corrupted. Replacement of the control board is typically required and is best performed by a technician to ensure correct part selection and handling of static-sensitive electronics.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements