F5
GE Profile
Fresh Food Evaporator Fan Circuit Fault
Service mode shows F5; fresh food fan operation is abnormal.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed fresh food evaporator fan motor, Ice obstructing fan blades, Loose fan connector, Main control board fan driver failure
How to Fix / Troubleshooting
Safety first: Disconnect power before removing interior panels.
- Listen for fan: With doors closed (or door switch held), the fan should run when the compressor is on. If not, proceed to inspection.
- Access fan: Remove shelves and the rear panel in the fresh food section to expose the fan.
- Check for ice: Clear any ice buildup around the fan housing. If ice returns quickly, investigate defrost issues.
- Test fan motor: Spin the blade by hand; if stiff or noisy, replace the fan motor. Verify voltage at the fan connector when commanded on.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Fresh Food Evaporator Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements