Service mode shows F6; condenser fan does not operate correctly.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Condenser fan motor failure, Obstruction in fan blades, Loose or burnt fan connector, Main control board output failure

Safety first: Unplug the refrigerator and be careful of hot compressor surfaces.

Access fan: Remove the rear lower access panel to reach the condenser fan.
Inspect blades: Clear any debris, insulation, or pet hair blocking the fan.
Test motor: With power briefly restored, see if the fan starts when the compressor runs. If not, test for voltage at the fan connector. If voltage is present but the fan does not run, replace the fan motor.
Board check: If no voltage is present and wiring is intact, the main control board may be defective.

Medium 3/5

Condenser Fan Motor

Check Price on Amazon

We may earn a commission from links on this page.