F7
GE Profile
Air Damper Control Fault
Service mode shows F7; damper operation between freezer and fresh food is abnormal.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck or broken damper door, Failed damper motor, Obstruction in air channel, Control board not driving damper
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing the damper assembly.
- Locate damper: The damper is usually in the upper rear of the fresh food compartment where cold air enters from the freezer.
- Inspect door: Remove the damper cover and check if the door moves freely. Clear any ice or debris.
- Test motor: With the cover off and power restored briefly, change temperature settings to see if the damper moves. If it does not move and has power, replace the damper assembly.
- Replace assembly: Install the new damper, ensuring the foam seals are properly seated to prevent air leaks.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Air Damper Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements