Excessive frost or ice buildup in the freezer compartment, on shelves, and around the door.

Safety: Unplug the refrigerator before adjusting doors or replacing gaskets.

Steps:

• 1. Inspect gasket: Check the entire perimeter of the freezer door gasket for tears, gaps, or hardened sections.
• 2. Paper test: Close the door on a strip of paper at various points. If the paper pulls out easily, the seal is weak in that area.
• 3. Check for obstructions: Ensure food packages or shelves are not preventing the door from closing fully.
• 4. Adjust door hinges: If the door is sagging, adjust the hinges according to the Hansa manual so the door aligns squarely with the cabinet.
• 5. Replace gasket: If the gasket is damaged, remove it from the door channel and install a new freezer door gasket designed for your Hansa model. Warm the gasket slightly to help it seat and seal.
• 6. Defrost: Manually defrost the freezer to remove existing ice buildup.

Tip: Avoid leaving the door open for long periods and ensure hot food is cooled before placing in the freezer.