Hansa Mechanical Vibration or Loose Components

Refrigerator making loud rattling or vibrating noises, especially from the back or bottom.

Advertisements

Possible Causes

Loose compressor mounting bolts, Vibrating condenser coils touching cabinet, Loose rear cover or drain pan, Refrigerator not leveled on floor

How to Fix / Troubleshooting

Safety: Unplug the refrigerator before tightening components at the rear.

Steps:

  • 1. Level the appliance: Use a spirit level to check front-to-back and side-to-side. Adjust the front leveling feet until the unit is stable and does not rock.
  • 2. Check rear cover: Ensure the metal or plastic rear cover is securely fastened and not vibrating.
  • 3. Inspect condenser coils: Make sure coils are not touching the cabinet or other parts. Gently bend them away if necessary.
  • 4. Compressor mounts: Verify that the compressor mounting bolts or rubber grommets are intact and tight. Replace worn compressor mounting grommets if needed.
  • 5. Drain pan: Ensure the drain pan above the compressor is properly seated and not rattling.

Note: Some humming is normal, but loud rattling usually indicates a mechanical issue that can be corrected.

Advertisements

Repair Difficulty

Easy 2/5

Required Part

Compressor Mounting Grommets
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements