Hansa
No Power / Main Power Circuit Failure
Refrigerator not running at all; no lights, no display, completely dead.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped household breaker or blown fuse, Faulty power cord, Defective main control board power supply, Loose internal power connections
How to Fix / Troubleshooting
Safety: Before opening any covers, unplug the refrigerator. Do not bypass safety devices.
Steps:
- 1. Check household power: Verify the outlet has power by plugging in another appliance. Reset any tripped breakers.
- 2. Inspect power cord: Look for cuts, burns, or crushed sections. If damaged, replace the power cord.
- 3. Test outlet voltage: Use a multimeter to confirm correct voltage at the outlet (typically 220–240 V AC in many Hansa markets).
- 4. Access main control board: Remove the rear cover and inspect the board for burnt components or loose connectors at the power input.
- 5. Replace main control board: If the board's power supply section is visibly damaged or no low-voltage outputs are present, replace the main control board.
Warning: If you are not experienced with mains voltage testing, contact a qualified electrician or appliance technician.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements