F5
Hotpoint Condenser Fan Error

Display shows F5 and the condenser fan may not operate, causing overheating at the back of the unit.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed condenser fan motor, Obstruction in fan blades, Loose wiring, Faulty fan driver on PCB

How to Fix / Troubleshooting

Safety first: Unplug the refrigerator before accessing the rear lower panel.

Steps:

  • Remove the rear access panel and inspect the condenser fan.
  • Clean dust and debris from the fan and condenser coil.
  • Check that the fan spins freely.
  • Test motor resistance and replace if open.

Corrective action: Replace the condenser fan motor if defective. If F5 persists, the main control board may be at fault.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Condenser Fan Motor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements