IceKing
No Power / Power Supply Fault
Refrigerator not running at all, no lights or display, completely dead.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown household fuse or tripped breaker, Faulty mains power cord, Failed internal power supply on main PCB, Loose terminal block connection
How to Fix / Troubleshooting
Safety first: Before opening any panels, ensure the appliance is unplugged. Do not work on live circuits.
Steps:
- 1. Check outlet: Plug a lamp or other device into the same socket to confirm power is present.
- 2. Inspect power cord: Look for cuts, kinks, or burn marks on the IceKing power cord. Replace if damaged.
- 3. Verify plug and fuse (UK models): Check the plug fuse and replace with the correct rating if blown.
- 4. Access main PCB: Remove the rear control cover and inspect the board for burnt components, especially near the AC input and transformer.
- 5. Terminal block check: Ensure the mains wires are securely fastened to the terminal block and there are no loose screws.
Note: If the internal power supply on the PCB has failed, the entire board should be replaced by a qualified technician.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements