Indesit Compressor Start Failure / Overload Cycling

Clicking noise from the rear, compressor tries to start then stops repeatedly, poor or no cooling.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Weak compressor start relay, Overloaded or seized compressor, Low mains voltage, Overheated compressor

How to Fix / Troubleshooting

Safety first: Unplug before accessing the compressor area.

Step-by-step checks:

  • 1. Allow cooling: If the compressor is extremely hot, unplug and let it cool for at least an hour, then retry.
  • 2. Replace start relay: Remove and inspect the relay/overload. If it rattles or shows burn marks, replace it with the correct Indesit part.
  • 3. Check ventilation: Ensure there is adequate space around the refrigerator and the condenser coils are clean to prevent overheating.

When to call a technician: If a new relay does not solve the issue, the compressor may be mechanically locked and require professional replacement.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Compressor Start Relay / Overload Protector
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements