Door not closing properly, gaps visible, condensation and frost forming around the door area.

Safety first: No electrical work required; unplug if you need to remove doors.

Step-by-step checks:

• 1. Inspect gasket: Look for splits, hardened sections, or areas not contacting the cabinet.
• 2. Warm and reshape: Use warm water or a hairdryer on low setting to gently soften and reshape minor gasket distortions.
• 3. Level the cabinet: Adjust front feet so the refrigerator leans slightly back, helping doors close automatically.
• 4. Adjust hinges: Tighten hinge screws and adjust door height/angle as needed. Remove heavy items from door shelves if they cause sagging.

When to call a technician: If the gasket is badly damaged, replace it with the correct Indesit door seal for your model.