Refrigerator not cooling at all, both fridge and freezer warm, interior light works but no compressor noise.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Unplug the appliance before accessing the rear compartment.
Step-by-step checks:
- 1. Listen and feel: After plugging in, listen for any hum or click from the compressor area. Carefully touch the compressor casing (after a few minutes) to see if it warms slightly.
- 2. Check thermostat / temperature setting: Ensure the appliance is not set to 'OFF' or 'Holiday' mode.
- 3. Inspect start relay: Remove the rear panel, locate the compressor start relay/overload, and check for burning or rattling. Replace if suspect.
- 4. Overload reset: If the compressor is very hot, unplug and allow it to cool for at least 30–60 minutes, then retry.
When to call a technician: If the compressor still does not start with a new relay, a sealed-system technician must test compressor windings and system pressures.
Repair Difficulty
Required Part
We may earn a commission from links on this page.