Er 1F
LG
Ice Room Fan Motor or Feedback Fault
Error code “Er 1F” and ice production stops; often associated with ice room fan issues.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Ice room fan motor failure, Ice buildup preventing fan rotation, Faulty fan feedback signal to PCB, Damaged ice room wiring harness
How to Fix / Troubleshooting
Safety: Unplug the refrigerator before servicing the ice compartment.
- Remove ice bin: Pull out the ice bin and inspect for frost buildup around the fan vents.
- Defrost ice room: If heavy frost is present, leave doors open and use a fan or a hair dryer on low to melt ice. Protect plastic parts from excessive heat.
- Access fan assembly: Remove screws and clips holding the ice room cover to expose the fan.
- Check fan movement: Spin the fan by hand. If stiff or blocked, clear obstructions or replace the fan.
- Test motor and wiring: Measure motor resistance and inspect the harness for damage. Replace the fan motor or harness as needed.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Ice Room Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements