F10
Liebherr
Ice Maker Sensor / Position Fault
Error code F10; ice maker may stop working or produce irregular ice, and water feed may be interrupted.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed ice maker position sensor, Jammed ice tray or ejector arm, Broken ice maker harness in door, Faulty ice maker module electronics
How to Fix / Troubleshooting
Safety first: Turn off the ice maker and unplug the refrigerator before working in the ice compartment.
Step-by-step:
- Inspect ice maker: Remove the ice bin and visually inspect the ice maker for jammed cubes, broken plastic parts, or frost buildup.
- Clear jams: Gently remove any stuck ice cubes. Do not use sharp tools that could damage the mold or sensors.
- Check movement: Manually move the ejector arm or tray (if possible) to ensure it is not seized.
- Wiring inspection: Check the harness from the cabinet to the ice maker, especially in the door hinge area, for broken or pinched wires.
- Reset ice maker: Some Liebherr models have a reset button or require turning the ice maker off for several minutes, then back on. Follow the user manual procedure.
- Replace module if needed: If the sensor or motor is defective, replace the complete Liebherr ice maker assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Ice Maker Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements