Maytag Short Cycling / Control or Sensor Issue

Refrigerator cycles on and off frequently; short run times and frequent starts.

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Dirty condenser coils causing overheating, Faulty temperature sensor or thermostat, Oversized unit in small space with poor ventilation, Control board miscalibration

How to Fix / Troubleshooting

Safety: Unplug the refrigerator before cleaning coils or accessing rear components.

Clean condenser coils: Use a coil brush and vacuum to remove dust from coils under or behind the unit.
Check ventilation: Ensure there is adequate clearance around the refrigerator per Maytag specifications.
Monitor temperatures: Use a thermometer to verify actual temperatures vs. setpoints.

If short cycling continues with clean coils and proper ventilation, a faulty sensor or control board may be to blame and should be tested.

Repair Difficulty

Medium 3/5

Required Part

Condenser Coils

Check Price on Amazon

We may earn a commission from links on this page.