Midea
User Interface Board Failure
Display and controls unresponsive, but interior lights may still work.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed control panel PCB, Loose ribbon cable, Moisture damage to touchpad, Software lockup
How to Fix / Troubleshooting
Safety First: Unplug the refrigerator before removing the control panel.
Steps:
- Power reset: Leave the unit unplugged for 10–15 minutes, then reconnect and see if the controls respond.
- Inspect UI connections: Remove the control panel and check the ribbon cable between the UI and main board. Reseat firmly.
- Check for moisture: Look for condensation or liquid behind the panel. Dry thoroughly if present.
- Replace UI board: If the panel remains dead, install a new Midea user interface/control panel board.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Control Panel / User Interface Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements