F1
Midea
Control Panel Keypad Fault
Display shows F1 and the refrigerator controls do not respond correctly to button presses.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck or shorted touchpad buttons, Moisture behind control panel, Loose ribbon cable between UI board and main PCB, Failed user interface board
How to Fix / Troubleshooting
Safety First: Unplug the refrigerator before removing the control panel.
Steps:
- Inspect control panel: Check for visible cracks, liquid spills, or condensation on or around the display and buttons.
- Dry the area: If moisture is present, gently dry the surface and allow the panel to air dry for several hours with power disconnected.
- Check connections: Remove the control panel housing and verify that the ribbon cable or harness between the UI board and main PCB is fully seated.
- Test buttons: After reconnecting power, test each button. If some remain unresponsive or F1 persists, the UI board is likely defective.
- Replace UI board: Install a new Midea control panel / user interface board and reassemble the housing.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Control Panel / User Interface Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements