Samsung Condenser Loop Heating / Poor Ventilation

Refrigerator exterior or door handles feel hot to the touch.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Normal condenser loop operation, Dirty condenser coils, Inadequate clearance around refrigerator, Condenser fan failure

How to Fix / Troubleshooting

Step 1 – Check installation clearance:

  • Ensure there is at least the manufacturer-recommended clearance at the sides, top, and back (typically 1–2 inches or more).

Step 2 – Clean condenser coils:

  • Unplug the refrigerator.
  • Remove the rear lower access panel.
  • Use a soft brush and vacuum to clean dust from the Condenser Coils and Condenser Fan area.

Step 3 – Verify condenser fan operation:

  • Restore power and listen for the fan running when the compressor is on.
  • If the fan does not run, replace the Condenser Fan Motor.

Note: Slight warmth on door edges is normal, but excessive heat indicates poor cooling of the condenser system.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Condenser Fan Motor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements