Sharp Ice Maker Assembly / Fill Issue

Ice maker not making ice, but water dispenser works.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed ice maker module, Frozen fill tube, Ice maker arm or sensor stuck in OFF position, Faulty ice maker water valve section

Safety: Unplug the refrigerator and shut off water before removing the ice maker.

Steps:

Check ice maker power: Ensure the ice maker switch (if present) is ON and the feeler arm is down.
Inspect fill tube: Look for ice blockage in the tube above the ice maker. Thaw with warm air if frozen.
Manually cycle (if possible): Use the test button on the ice maker (if equipped) to start a cycle. If it does not move, the module is likely bad.
Replace ice maker: Install a Sharp-compatible ice maker assembly if it fails to cycle or fill.

Medium 3/5

Ice Maker Assembly

Check Price on Amazon

We may earn a commission from links on this page.