Display shows E9 and the evaporator fan may not run, leading to warm temperatures and frost buildup.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Disconnect power before opening the freezer interior.
Access the evaporator fan:
- Remove freezer shelves and the rear interior panel.
- Locate the evaporator fan mounted near the top or center of the evaporator compartment.
Inspection:
- Check for heavy frost or ice blocking the fan blades. If present, defrost the area by leaving the unit unplugged with doors open and towels to catch water.
- Spin the fan by hand to check for free movement.
- Inspect wiring and connectors for damage.
Testing:
- With power restored (technician recommended), close the door switch and listen for the fan when the compressor is running.
- If the fan does not run and has proper voltage, replace the evaporator fan motor.
Repair: Install a new evaporator fan motor compatible with your Summit model. Ensure the fan is correctly oriented and that the rear panel is reinstalled to direct airflow properly.
Repair Difficulty
Required Part
We may earn a commission from links on this page.