Interior LED lighting flickers or does not turn on, F17 or lighting error on display

Safety first: Unplug the refrigerator before removing light covers or panels.

Steps:

• 1. Check door switch: Verify that the door switch operates correctly (light should turn off when switch is pressed). If not, see door switch faults.
• 2. Inspect LED module: Remove the light cover in the refrigerator compartment. Look for signs of moisture or burn marks on the LED board.
• 3. Reseat connectors: If the LED module has a plug, disconnect and reconnect it to ensure good contact.
• 4. Replace LED module: If the module is visibly damaged or does not light when powered, replace it with the correct V-ZUG LED light assembly.
• 5. Check LED driver: If multiple lights are out, the LED driver on the main PCB or a separate driver module may have failed. Inspect for damage and replace as needed.

Warning: Use only V-ZUG-approved LED modules; incorrect replacements can overload the driver circuit.