Safety: Unplug the refrigerator and shut off the water supply before servicing the ice maker.

Steps to address E10 (ice maker fault):

Check for mechanical jams: Remove the ice bin and inspect the ice maker for stuck cubes, frost buildup, or a jammed ejector arm. Clear any obstructions carefully.
Verify water supply: Ensure the water valve to the refrigerator is open and the supply line is not kinked. Check for leaks.
Inspect wiring and connectors: Remove the ice maker cover (if present) and check the harness connection to the ice maker module. Reseat connectors.
Reset the ice maker: Some Vestfrost models have a test or reset button on the ice maker. Press and hold as per the user manual to initiate a test cycle after restoring power.
Replace ice maker module: If the module does not move through a test cycle or E10 persists, replace the complete ice maker assembly with a Vestfrost-compatible unit.

Warning: Do not force the ejector arm or gears; this can permanently damage the module.

Error E10 displayed; ice maker (if equipped) not producing ice or stops mid-cycle.

Possible Causes