E6
Whirlpool
Ice Maker Motor / Harvest Fault
Display shows E6, ice maker may not harvest or fill correctly.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed ice maker motor module, Jammed ice cubes in mold, Stripped ice maker drive gears, Faulty ice maker wiring harness
How to Fix / Troubleshooting
Safety First: Unplug the refrigerator and turn off the water supply to the ice maker.
Steps:
- Inspect the ice maker: Remove the ice bin and check for jammed or fused ice cubes preventing rotation.
- Clear jams: Use warm water to gently melt stuck cubes. Do not use sharp tools that can damage the mold.
- Check the drive mechanism: On modular Whirlpool ice makers, inspect the front cover and gears for stripped teeth or broken parts.
- Test ice maker motor: If accessible, run the ice maker test cycle per the tech sheet. If the motor does not run and power is present, replace the ice maker assembly.
- Inspect wiring: Verify the ice maker harness is fully seated and not damaged where it passes through the cabinet.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Ice Maker Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements