E8
Whirlpool
Condenser Fan Motor Fault
Display shows E8, condenser fan may not run, compressor may overheat, poor cooling.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed condenser fan motor, Obstructed condenser fan blade, Loose or damaged fan wiring, Main control board fan driver failure
How to Fix / Troubleshooting
Safety First: Unplug the refrigerator before accessing the rear compartment.
Steps:
- Access condenser fan: Remove the rear lower access panel to expose the condenser fan and compressor.
- Inspect fan area: Clear dust, pet hair, or debris blocking the fan blade. Ensure the blade spins freely by hand.
- Test motor: With power disconnected, check fan motor resistance. An open circuit indicates a failed motor.
- Check wiring: Verify the fan connector is secure and wires are not damaged or burnt.
- Power test (advanced): With power restored and great caution, check for voltage at the fan motor when the compressor is running. If voltage is present but the fan does not run, replace the fan motor. If no voltage, suspect the main control board.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Condenser Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements