AL-KO
Moisture Ingress into Display / Control Panel
Robot mower display fogs up or shows condensation inside the screen.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or damaged panel gasket, High humidity and temperature changes, Cracked display window, Improper cleaning with high-pressure water
How to Fix / Troubleshooting
Safety first: Turn off the mower and do not continue using it in wet conditions until the issue is resolved.
- Dry the unit: Move the mower to a dry indoor location. Open any service flaps to allow air circulation. Let it dry for 24–48 hours.
- Inspect seals: Check the rubber gasket around the display and control panel for cracks or deformation. Replace if damaged.
- Avoid pressure washing: Clean the mower only with a damp cloth and soft brush. Do not use a hose or pressure washer.
- Panel replacement: If condensation repeatedly appears or the display malfunctions, replace the complete control panel assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Control Panel / Display Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements