E017
Ambrogio
Overtemperature Protection
Robot shows E017 and stops, internal temperature warning
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Robot operating in direct sun at high ambient temperature, Cooling airflow blocked by grass, Faulty temperature sensor on main board, Battery overheating
How to Fix / Troubleshooting
Safety first: Turn OFF the robot and move it to a shaded, cool area.
- Allow to cool: Let the robot sit powered OFF for at least 30 minutes before restarting.
- Clean ventilation: Inspect and clean any ventilation slots or openings in the chassis. Remove grass buildup that could trap heat.
- Adjust schedule: Program mowing times for cooler parts of the day (morning or evening) to reduce thermal stress.
- Check battery temperature: If the battery compartment feels very hot, the battery pack may be aging or faulty and should be evaluated or replaced.
- If E017 appears quickly after cool-down: The internal temperature sensor on the main board may be defective and require board replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control Board (Temperature Sensor)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements