Mower shows E008 and stops near the boundary wire

Safety: Disconnect the charging station from mains before adjusting the wire.

• Check installation distances: Ensure the boundary wire is installed according to Bosch Indego guidelines (typically at least several centimeters away from metal fences, buried cables, or large metal objects).
• Inspect for twisted or looped sections: Avoid unnecessary coils or tight loops of wire that can distort the signal.
• Verify connectors: Replace any corroded or poorly crimped boundary wire connectors with new, gel-filled connectors.
• Test with simplified loop: Temporarily create a small test loop near the station and connect it instead of the full garden loop. If E008 disappears, the interference is in the garden layout; adjust routing accordingly.
• If interference persists even on a test loop: The charging station electronics may be faulty and need replacement.