Bosch Docking Station Power Loss

Robot mower docking station LED is off and mower cannot charge

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blown fuse in power adapter, Faulty mains outlet, Damaged low-voltage cable, Failed docking station PCB

Safety: Disconnect the power adapter from mains before inspection.

Test outlet: Plug another device into the same outlet to confirm power.
Check adapter: Inspect for damage or overheating; measure output voltage with a multimeter if possible.
Inspect cable and plug: Look for cuts, crushed sections, or bent pins.
Replace components: If the adapter is faulty, replace with a genuine Bosch charging station power supply. If the adapter is good but LED remains off, the docking station PCB may need replacement.

Medium 3/5

Charging Station Power Supply

Check Price on Amazon

We may earn a commission from links on this page.