Flymo Moisture Ingress / Seal Degradation

Robot mower housing or display shows signs of condensation inside the screen or under the cover.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aged or damaged cover seals, Cracked housing, Storage in very damp environment, Washing with hose or pressure washer

Safety first: Turn OFF the mower and remove it from the charging station.

Dry slowly: Place the mower in a dry indoor environment for 24–48 hours to allow moisture to evaporate.
Inspect housing: Look for visible cracks, gaps, or missing rubber seals around the display and cover.
Avoid water jets: Do not clean the mower with a hose or pressure washer; use a brush and damp cloth only.
Seal replacement: If condensation recurs, replace the top cover or seals as available for your Flymo model.

Medium 3/5

Top Cover Assembly

Check Price on Amazon

We may earn a commission from links on this page.