Gardena
Display Module or Backlight Failure
Display is blank or very dim, but the mower still appears to charge or operate partially.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed LCD or LED display module, Loose display ribbon cable, Moisture damage behind display, Faulty display driver on main PCB
How to Fix / Troubleshooting
Safety first: Switch OFF the mower and remove the key before opening the display housing.
- Check contrast/brightness: Some models allow adjusting display contrast; verify settings in the manual.
- Inspect connections: Open the top cover and ensure the display ribbon cable is firmly seated in its connector.
- Look for corrosion: Check the display board for signs of moisture or corrosion and clean gently if minor.
- Use app (if available): If your Gardena model supports app control, use it to access settings while the display is faulty.
If the display remains blank, the display module or main PCB will likely need replacement.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Gardena Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements