Greenworks Keypad / Control Panel Failure

Robot mower display or keypad buttons do not respond reliably; some keys work intermittently.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn keypad contacts, Moisture under keypad, Damaged ribbon cable to main PCB, Cracked display module

Safety first: Turn OFF the mower before working near the control panel.

Clean surface: Wipe the keypad area with a dry cloth to remove dirt and moisture.
Dry the unit: If recently exposed to rain, allow the mower to dry indoors for 24 hours.
Test with app (if available): If your Greenworks model supports app control, verify that commands work via the app. This helps isolate keypad vs. main board issues.

Persistent keypad issues usually require replacement of the keypad/display module.

Medium 3/5

Keypad / Display Module

Check Price on Amazon

We may earn a commission from links on this page.