Robot mower runs but does not return to the charging station; eventually stops with empty battery somewhere in the lawn.

Safety first: Turn OFF the mower before adjusting the station or wires.

• Check station placement: Ensure the charging station is level, with a clear straight path in front as specified in the Hecht manual.
• Verify boundary routing: The boundary wire should run straight into the station and not form tight loops or corners near the base.
• Inspect guide wire (if present): Make sure the guide wire is properly connected to the station and not broken.
• Test manual docking: Manually place the mower in front of the station and start a return‑to‑base command. If it still misses, the Docking Sensor or boundary receiver may need service.