Hecht Moisture Ingress into Control Panel

Robot mower shows condensation or water droplets inside the display window.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Damaged top cover seal, Cracked display window, High‑pressure cleaning, Prolonged exposure to heavy rain

Safety first: Turn OFF the mower and remove it from the charging station.

Dry the unit: Place the mower in a warm, dry indoor area for 24–48 hours to allow moisture to evaporate.
Inspect seals: Check the rubber gasket around the display and top cover for cracks or gaps.
Avoid pressure washing: Clean the mower only with a damp cloth and low‑pressure water as recommended by Hecht.
Replace damaged parts: If moisture returns, replace the Top Cover with Seal or the Control Panel Assembly to restore water resistance.

Medium 3/5

Top Cover with Seal

Check Price on Amazon

We may earn a commission from links on this page.