Guide 2 not found
Husqvarna
Guide wire 2 signal missing
Display shows “Guide 2 not found” and mower cannot follow guide 2 path.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Broken guide 2 wire, Loose guide 2 connection at station, Incorrect splicing into boundary loop, Station guide 2 output failure
How to Fix / Troubleshooting
Safety first: Disconnect station power.
- Verify wiring: Confirm guide 2 is connected to the correct terminal and properly joined to the boundary loop at the far end.
- Inspect for damage: Follow the guide 2 path and repair any visible cuts or breaks.
- Use test loop: Temporarily connect a short test wire as guide 2 to see if the mower detects it, isolating whether the issue is in the lawn wiring or station.
- Replace station (if needed): If the test loop fails and other guides work, the station’s guide 2 output may be defective.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements