E16
Robomow Chassis Impact / Internal Shock Detected

Robomow displays E16 and stops, often after hitting a hard obstacle or curb.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Severe collision causing internal misalignment, Damaged bumper frame, Loose internal mounting screws, Cracked chassis

How to Fix / Troubleshooting

Safety first: Turn the mower OFF immediately after a strong impact. Inspect for visible damage before further use.

  • External inspection: Check the housing, bumper, and wheels for cracks, deformation, or parts out of place.
  • Internal inspection: If comfortable, remove the top cover and inspect the main board mounts, motor mounts, and battery for movement or damage. Tighten any loose screws.
  • Test bumper and tilt sensors: Ensure the bumper moves freely and the mower sits level on all wheels.
  • Reset and test: Power ON, clear the error, and test in a safe, open area.
  • Visible structural damage or recurring E16: Do not continue using the mower. The chassis or internal mounts may need replacement by a service center.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Robomow Chassis
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements