Robomow User Interface / Keypad Failure

Robomow display or keypad buttons do not respond, but the mower still charges.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Damaged keypad membrane, Moisture under keypad, Loose ribbon cable to main board, Faulty display/keypad module

Safety first: Turn OFF the mower and disconnect from the base station before opening the top cover.

Inspect keypad area: Look for cracks or signs of water ingress around the keypad.
Dry the area: If moisture is present, allow the mower to dry indoors for 24 hours.
Check ribbon cable: Remove the top cover per the manual and reseat the ribbon cable connecting the keypad/display to the main board.
Test buttons: Power ON and test each button.
No response after reseating: Replace the keypad/display module with a compatible Robomow part.

Medium 3/5

Display and Keypad Module

Check Price on Amazon

We may earn a commission from links on this page.