Yard Force Uneven Cutting Height / Deck Tilt

Robot mower cuts unevenly, leaving scalped patches and tall patches.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Height adjustment mechanism jammed, Worn or bent chassis, Front wheels at different heights, Mower frequently tilting on bumps

Safety first: Turn OFF the mower and disconnect the battery before adjusting height.

Steps:

1. Check height setting: Move the Yard Force height adjuster through its full range to free any jams, then set to the recommended level.
2. Inspect wheels: Ensure both front and rear wheels are the same size and not worn unevenly.
3. Check chassis: Look for cracks or warping in the deck that could tilt the blade plane. Replace the chassis if deformed.
4. Level lawn: Address severe bumps or depressions in the lawn that cause the mower to tilt.

Medium 3/5

Height Adjustment Mechanism / Chassis

Check Price on Amazon

We may earn a commission from links on this page.