Bagotte
Complete Power Loss
Robot vacuum does not power on at all; no lights, no sounds, even when placed on the dock.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Dead or disconnected battery pack, Faulty charging dock or power adapter, Blown fuse or damaged power circuit on main board, Defective main power switch
How to Fix / Troubleshooting
Safety: Unplug the dock from the wall before inspection. Do not open the battery pack.
Steps:
- Check wall outlet: Plug another device into the same outlet to confirm it has power.
- Inspect dock and adapter: Ensure the Bagotte adapter is firmly plugged into the dock and wall. Check for damage to the cable.
- Look for dock indicator: Many docks have a small LED. If it is off, the dock or adapter may be faulty; try a replacement adapter with the same rating.
- Place robot on dock: Align the robot so its charging contacts touch the dock contacts. Look for any lights or charging indicators.
- Check main power switch: Some Bagotte models have a physical ON/OFF switch on the side or bottom. Ensure it is in the ON position.
- Access battery (if comfortable): Remove the battery cover and verify the battery connector is firmly plugged into the robot.
- If still dead: Replace the Bagotte battery pack. If a new battery and known-good dock do not restore power, the main control board or internal fuse is likely damaged and requires professional replacement.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements