Bagotte Side Brush Non-Functional Without Error

Robot vacuum’s side brush does not spin, but no specific error code is shown.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Side brush motor partially failed, Side brush connector loose, Side brush hub stripped, Main board not driving side brush output

Safety: Turn OFF the robot.

Steps:

Remove side brush: Unscrew and pull off the side brush. Inspect the hub for rounding or cracks.
Test motor shaft: With the robot ON and cleaning started, briefly observe if the motor shaft turns (keep fingers clear). If it does, replace the side brush itself.
If shaft does not turn: Turn OFF, open the bottom cover, and check the side brush motor connector on the main board.
Replace motor: If wiring is intact but the motor never runs, install a new side brush motor assembly.

Medium 3/5

Side Brush Motor Assembly

Check Price on Amazon

We may earn a commission from links on this page.